Menu

Online Shop

>

80/81 PE 250/400 pivot bolt
80/81 PE 250/400 pivot bolt
80/81 PE 250/400 pivot bolt
80/81 PE 250/400 pivot bolt
 

80/81 PE 250/400 pivot bolt$77.00

Replacement Swingarm pivot bolt for the Suzuki 80 / 81 / 82 PE 250 / 400
The original pivot bolt was too short in the shank and the actual thread sits in the frame which wears down that section of the bolt and quickly becomes sloppy in the frame hole.
The section is small so its hard to fit a sleeve in and building the section of the bolt up with weld isn't recommended
This replacement bolt is made to the same specs as the original but with a longer shank.
It is machined from 4140 and zinc plated.

Click on smaller image to see comparison to an original bolt

Part # = 61211-40600

Part Description = SHAFT,REAR SWING ARM

This pivot bolt fits the following...

PE 250 T 1980

PE 250 X 1981

PE 250 X 1982

PE 400 T 1980

PE 400 X 1981

PE 400 X 1982

RS 250 T 1980

RS 250 X 1981

Out of stock