Online Shop
Online Shop > Miscellaneous parts
| 80/81/82 PE 250/400 pivot bolt$110.00Replacement Swingarm pivot bolt for the Suzuki 80 / 81 / 82 PE 250 / 400The original pivot bolt was too short in the shank and the actual thread sits in the frame which wears down that section of the bolt and quickly becomes sloppy in the frame hole.The section is small so its hard to fit a sleeve in and building the section of the bolt up with weld isn't recommended This replacement bolt is made to the same specs as the original but with a longer shank. It is machined from 4140 and zinc plated. Click on smaller image to see comparison to an original bolt Part # = 61211-40600 Part Description = SHAFT,REAR SWING ARM This pivot bolt fits the following... PE 250 T 1980 PE 250 X 1981 PE 250 X 1982 PE 400 T 1980 PE 400 X 1981 PE 400 X 1982 RS 250 T 1980 RS 250 X 1981 |
|---|---|
